Hello Lapo and users of smartfoxserver
I try to use avatar example (as2)
I do this.
1- download the program.
2- open 2 ports. 8080 and 9339.
3- Change config.xml, the ip for mi computer ip 192.168.1.105.
4- I open avatar example (as2) with flash.
5- Public Settings. I change the flash to 8, as2 and smartfox Api of As2.
6- I change the ip of the .swf as2 to mi ip public. http://181.166.10.167/
7- I change the ip of crossdomain.xml for the ip public. " <allow-access-from domain="181.166.10.167" /> "
8- Open start.bat.
9- Test the flash swf and work fine.
10- Download wamp.
11- Install wamp
12- Open port 80
13- Go to www. And change the folder for the index.html of smartfoxserver avatar example and the .swf.
14- Start the wamp.
15- Go to mi new web. I see the start smartfoxserver example, but say conecting and say cant connect. I dont know what can i do. I need your help.
Thanks for readme, i wait your reply. Bye!
Start the avatar example (as2) smartfoxserver Pro FIXED
Start the avatar example (as2) smartfoxserver Pro FIXED
Last edited by Desqui on 27 Dec 2014, 06:12, edited 1 time in total.
Re: Start the avatar example (as2) smartfoxserver Pro
In the step 7 i use mi ip <allow-access-from domain="181.166.10.167" /> "
Because is mi web page. You can join now and see, is imposible connect.
I dont know what can i do.
And sorry, i say only Lapo, but i see 2 admins more. The 3 are a good staff
Because is mi web page. You can join now and see, is imposible connect.
I dont know what can i do.
And sorry, i say only Lapo, but i see 2 admins more. The 3 are a good staff
Re: Start the avatar example (as2) smartfoxserver Pro
I read the docs. And i see the problem. I use the IP of mi web page and not the name. I do a free web page with the name ermac.wc.lt and works perfectly C: Sorry for mi bad english and mi noob question xD
Return to “SmartFoxServer 1.x Discussions and Help”
Who is online
Users browsing this forum: No registered users and 74 guests